Кабельна збірка FPC для 3D-vision

Кабельна збірка FPC для 3D-vision

Samtec 1x20/1x10, 100mm cable path, NDA control, and зразок evidence for vision OEMs.

Для інженер із закупівель однієї ціни за штуку недостатньо. У реальному проєкті файли відкрили лише після NDA та перевірки постачальника; потім RFQ містив 1x20 Pin Samtec connector, 1x10 Pin Samtec connector, 100mm cable length і 4-week lead time. Перед першим PO разом перевіряють FPC, кабель, роз’єм, тест, простежуваність і графік.

ISO 9001|ISO 13485
Engineering review before quotationPrototype through volume productionTest report and traceability support
Кабельна збірка FPC для 3D-vision — flexible printed circuit board

Коротко

Кабельна збірка FPC для 3D-vision — це камерне з’єднання з FPC-хвостом, fine-pitch роз’ємом, трасою кабелю, екрануванням і електричною перевіркою.

RFQ перевіряє Samtec 1x20/1x10, маршрут 100mm, NDA, межі тестів і строки зразків.

Зразки зазвичай плануються на 2-4 тижні, коли креслення, BOM, доступність роз’єму й вимоги до звіту зрозумілі.

Applicable IPC and UL requirements are reviewed alongside customer-specific automotive traceability, documentation, and change-control requirements.

RFQ кабелю камери для 3D-vision

Applicable IPC and UL requirements are reviewed alongside customer-specific automotive traceability, documentation, and change-control requirements.

Factory case: 3-month vetting phase, 1x20 Pin Samtec connector, 1x10 Pin Samtec connector, 100mm cable length, 4-week lead time.
Україна та європейські OEM-ланцюги: useful for 3D vision heads, industrial measuring cameras, robotics vision modules, and compact inspection equipment.
Engineering checks FPC tail geometry, Samtec mating data, роз’єм orientation, bend radius, shielding, labels, and fixture method.
зразок samples usually start at 10 engineering pieces; pilot lots move to 100-120 шт. after креслення and BOM control.
Documentation can include DFM notes, COC, continuity report, inspection photos, traceability, and approved-substitute records.

Таблиця можливостей

Build scopeFPC tail + camera cable + Samtec 1x20/1x10 or equivalent роз’єм + label + electrical test
Typical cable path100mm reference path from case bank; custom routing, exit direction, and service loop reviewed per drawing
MOQ10 engineering samples; 100-120 шт. pilot batches; production MOQ confirmed after connector and fixture review
Sample lead time2-4 тижні after NDA, креслення, BOM, connector availability, and test limits are complete
Production lead time2-3 weeks for stable small-to-medium batches; 4 weeks when Samtec sourcing, NDA approval, or fixtures add review steps
Connector reviewSamtec 1x20/1x10, JST, Molex, TE, board-to-wire, FPC/ZIF, candidate alternates with datasheets
Electrical checksContinuity, pin map, insulation resistance when required, signal-path review, fixture method and report format
Workmanship referenceIPC-A-620 cable workmanship with IPC-A-610 review when soldered FPC or PCBA interfaces are included
Compliance flow-downISO 9001 and ISO 13485 quality systems remain available where applicable, with customer-specific automotive documentation, traceability, and change-control requirements.
RFQ outputMOQ, sample timing, production timing, connector risk, tooling assumptions, test evidence, and open engineering questions

Visión 3D y medición industrial

Visión 3D y medición industrial

Use when camera routing, Samtec pin count, 100mm cable path, NDA gate, and test evidence must be closed before креслення release.

Robótica y cámaras móviles

Moving camera modules need cable exit, service loop, and роз’єм retention reviewed before серія.

Inspección de fábrica

Procurement can request sample reports, traceability, packing photos, and approved alternates before 100-120 шт. batches.

Calificación con NDA

For confidential modules, supplier qualification can finish before files are shared; quotation follows quickly after BOM and креслення.

Recuperación por falta de conector

When Samtec or equivalent parts constrain schedule, datasheets are compared and validation samples can be built before substitution.

NDA e intake de proveedor

1

NDA e intake de proveedor

Confirm NDA, factory background, certifications, data-security expectations, and approved recipients for креслення, BOM, and 3D files.

2

Revisión de conector y DFM

Engineering reviews Samtec PN, mating connector, pin map, cable length, FPC tail thickness, bend exit, strain relief, labels, and alternates.

3

Cotización y riesgos

The quotation separates sample MOQ, pilot MOQ, connector sourcing, fixture assumptions, report format, open drawing issues, and lead time.

4

Muestras y evidencia

The зразок run verifies mating, length, routing, continuity, insulation resistance when required, inspection criteria, labels, and packing.

5

Piloto y repetición

After buyer validation, pilot lots lock revision control, approved components, report format, packaging, replacement rules, and change-control flow-down.

Por qué los OEM de visión concentran FPC, cable y conector

NDA control

Supplier qualification, IP control, and RFQ review happen before confidential camera креслення enters the factory.

Connector discipline

Samtec 1x20/1x10, mating height, latch direction, and approved alternates are checked before зразок release.

Production evidence

The RFQ can include continuity reports, inspection photos, COC, traceability, and sample evidence instead of only a unit price.

Controlled scale-up

10 samples, 100-120 шт. pilots, and repeat orders keep the same revision, fixtures, labels, and component approvals.

Публічні посилання на стандарти

Public links explain the standards families; the released drawing, purchase specification, and inspection plan remain the acceptance authority.

IPC-A-620 workmanship

IPC-A-620 is used when the drawing needs cable workmanship language for connector termination, solder, strain relief, routing, inspection, and acceptance records. IPC reference

UL-758 wire evidence

UL-758 is reviewed when procurement asks for recognized wire insulation, AWM context, or material evidence for the cable portion of the assembly. UL reference

Automotive-grade quality controls

Automotive programs follow customer-specific quality, traceability, documentation, and change-control requirements. Automotive-grade quality controls

Докази з реального застосування

Anonymized cases show the supplier-side details that affect quote confidence for vision and automation buyers.

NDA-first 3D vision qualification

A 3D vision and industrial measurement OEM required strict IP protection before sharing files. The supplier had to pass headquarters and supply-chain review, execute the NDA, then quote the released cable package without losing the launch window for Україна та європейські OEM-ланцюги.

Concrete numbers: 3-month vetting phase, 1x20 Pin Samtec connector, 1x10 Pin Samtec connector, 100mm cable length, 4-week lead time

Initial automation cable order

A South American industrial automation distributor needed rapid technical validation, equivalent connector and terminal options, and sample testing before moving first orders into production.

Concrete numbers: 100-120 unit batches, 2-3 weeks lead time after payment, 5 connector/housing variants per assembly

Our Shenzhen SMT factory26 placement machines · 11 SMT lines4 nitrogen reflow ovensAI-assisted 3D SPI & AOI, MES-linked01005 placement in mass production
See our Shenzhen factory

Надішліть креслення камери, PN Samtec, BOM, NDA та прогноз

Send your Gerber, drawing or spec — a flex-PCB engineer replies with a DFM-checked quote and lead time. No bounce to another page: submit right here.

  • Free DFM-checked quote — no obligation
  • Low MOQ — prototype to volume
  • Built to IPC standards with ISO 9001 / ISO 13485 quality systems
  • NDA on request — files kept confidential

Get a Free DFM-Checked Quote

Upload your Gerber, drawing or spec. A flex-PCB engineer replies with a DFM-checked quote and lead time.

Click to upload or drag and drop

NDA on request · Files kept confidential

Що надіслати з RFQ на кабель 3D-vision

Complete inputs let engineering quote connector, FPC, cable path, and test risk instead of guessing.

Send camera cable креслення, FPC or Gerber data, BOM, Samtec or equivalent PN, mating connector data, target MOQ, sample quantity, and annual forecast.

Include cable length, 100mm or custom routing, exit direction, bend path, service loop, shield or drain requirement, label location, and packing rules.

Provide NDA requirements, AVL restrictions, country-of-origin concerns, test limits, fixture method, inspection class, and required reports.

Share previous failures, rejected samples, connector shortage history, or supplier notes when the RFQ is a recovery or transfer project.

Що ви отримаєте у відповідь

The response is structured for procurement, engineering, and quality review before PO release.

MOQ, зразок lead time, production lead time, connector sourcing status, fixture needs, tooling assumptions, and open risks.

DFM notes covering Samtec interface, FPC tail, bend exit, routing, strain relief, label rules, packaging, and missing dimensions.

Applicable IPC and UL requirements are reviewed alongside customer-specific automotive traceability, documentation, and change-control requirements.

If креслення or BOM is incomplete, the response separates firm pricing from assumptions so buyers can compare suppliers without hidden risk.

What MOQ should we plan for 3D vision FPC cable samples?

Plan on 10 engineering samples when креслення, BOM, connector PN, cable length, and test limits are complete. Pilot batches commonly start around 100-120 шт. after the buyer approves mating, fixture method, label rules, packaging, and inspection records.

How long do samples and production usually take?

Simple samples are normally planned at 2-4 тижні after NDA release, drawing freeze, connector availability, and test limits are clear. Stable small-to-medium production can run in 2-3 weeks, while Samtec sourcing, fixture work, or formal qualification can push planning toward 4 weeks.

Can you quote before the NDA is complete?

We can discuss capability, typical lead time, certification flow-down, and what data will be needed, but accurate pricing needs the controlled drawing package. For IP-sensitive 3D vision modules, the NDA and approved recipient list should be finished before full BOM and geometry release.

Which standards should we list on the drawing?

Applicable IPC and UL requirements are reviewed alongside customer-specific automotive traceability, documentation, and change-control requirements.

What causes quote drift on camera cable programs?

Quote drift usually comes from missing connector PNs, incomplete mating data, unclear cable length, undefined bend exit, changing labels, unavailable Samtec parts, or test limits added after pricing. We mark those assumptions in the RFQ response so procurement can close the gaps before PO release.

Can alternate connectors be validated?

Yes. Send the original PN, mating connector, pin count, mechanical envelope, electrical limits, and AVL restrictions. We compare datasheets, identify fit or locking risks, and can build sample assemblies for buyer validation before a substitute appears in production.

Публічні посилання на стандарти

Use these references for terminology context; production acceptance follows your released drawing and purchase specification.

IPC electronics standards

IPC context helps frame cable workmanship, soldered FPC interfaces, strain relief, inspection language, and supplier documentation.

View IPC reference

UL safety organization

UL background helps procurement understand when UL-758 wire recognition or AWM evidence matters for a cable assembly.

View UL reference

Automotive-grade quality controls

Automotive programs follow customer-specific quality, traceability, documentation, and change-control requirements.

Automotive-grade quality controls

Інженерна перевірка фабрики

Supplier-side RFQ experience for Кабельна збірка FPC для 3D-vision: FPC, cable, connector, test, documentation, and confidentiality risk.

FlexiPCB Engineering Team

FlexiPCB engineering and RFQ reviewer

FlexiPCB's engineering team reviews manufacturability, documentation, and production risk for flex PCB and cable-assembly programs.

Factory KPI

Case-bank RFQ included 3-month vetting phase, 100mm cable length, and 4-week lead time

Sample path

10 engineering samples before 100-120 шт. pilot batches when креслення and BOM are complete

Standards

ISO 9001 and ISO 13485 quality systems remain available where applicable, with customer-specific automotive documentation, traceability, and change-control requirements.

Documentation

DFM notes, COC, continuity report, inspection photos, traceability, and approved-substitute records

Наші послуги

Гнучкі друковані плати

Дізнатися більше

Жорстко-гнучкі друковані плати

Дізнатися більше

Монтаж гнучких друкованих плат

Дізнатися більше

Монтаж жорстко-гнучких плат

Дізнатися більше

Прототипи гнучких плат

Дізнатися більше

HDI гнучкі друк. плати

Дізнатися більше

Ребро жорсткості для гнучких друкованих плат

Дізнатися більше

Обробка поверхні гнучких друкованих плат

Дізнатися більше

Гнучка друкована плата з контрольованим імпедансом

Дізнатися більше

Багатошарова гнучка друкована плата

Дізнатися більше

Гнучка плата CAN Bus

Дізнатися більше

Гнучка PCB з gold fingers

Дізнатися більше

Instant PCB Quote

Дізнатися більше

Flex PCB Box Build Assembly

Дізнатися більше

Кабельне складання Flex PCB

Дізнатися більше

Складання роз’ємів FPC

Дізнатися більше

Кабельна збірка FPC з overmold

Дізнатися більше

Мікрокоаксіальна кабельна збірка для FPC

Дізнатися більше

Кабельна збірка FPC для роботизованих датчиків

Дізнатися більше

Кабельна збірка FPC-пігтейла

Дізнатися більше

Кабельна збірка LVDS FPC

Дізнатися більше
Отримати миттєву пропозицію